Heated steering wheel and seat heaters heat the side grips of the steering wheel and seats, respectively. Seat ventilators maintain good ventilation by pulling air through the seat upholstery.
WARNING
To prevent minor burn injuries
Care should be taken to prevent injury if anyone in the following categories comes in contact with the steering wheel and seats when the heater is on:
- Babies, small children, the elderly, the sick and the physically challenged
- Persons with sensitive skin
- Persons who are fatigued
- Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold remedies, etc.)
To prevent damage to the seat heaters and seat ventilators
Observe the following precautions to prevent the minor burns or overheating
- Do not cover the seat with a blanket or cushion when using the seat heater.
- Do not use seat heater more than necessary.
NOTICE
Do not put heavy objects that have an uneven surface on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.
To prevent battery discharge, do not use the functions when the engine is not running.
Heated steering wheel
Turns the heated steering wheel on/off
The indicator light comes on when the heated steering wheel is operating.
Operation condition
Vehicles without a smart key system:
The heated steering wheel can be used when the engine switch is in the “ON” position.
Vehicles with a smart key system:
The heated steering wheel can be used when the engine switch is in IGNITION ON mode.
Seat heaters
Without seat ventilators
With seat ventilators
Each time the switch is pressed, the operation condition changes as follows.
Hi (3 segments lit) -> Mid (2 segments lit) -> Lo (1 segment lit) -> Off
The level indicator (amber) lights up during operation.
Operation condition
Vehicles without a smart key system:
The seat heaters can be used when the engine switch is in the “ON” position.
Vehicles with a smart key system:
The seat heaters can be used when the engine switch is in IGNITION ON mode.
Seat ventilators
Each time the switch is pressed, the operation condition changes as follows.
Hi (3 segments lit) -> Mid (2 segments lit) -> Lo (1 segment lit) -> Off
The level indicator (green) lights up during operation.
The seat ventilators can be used when
The engine switch is in IGNITION ON mode.
Air conditioning system-linked control mode
When a seat ventilator is set to Hi, the fan speed of the seat ventilator may increase according to the fan speed of the air conditioning system