Toyota Camry Coolant is typically a liquid or gas substance used to regulate the temperature of your engine
Engine Coolant
The coolant level is satisfactory if it is between the “F” and “L” lines on the reservoir when the engine is cold.
- Reservoir cap
- “F” line
- “L” line
If the level is on or below the “L” line, add coolant up to the “F” line.
Valvoline Multi-Vehicle 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA
Coolant selection
Only use “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology.
- U.S.A.:
“Toyota Super Long Life Coolant” is a mixture of 50% coolant and 50% deionized water. (Minimum temperature: -31ºF [-35ºC]) - Canada:
“Toyota Super Long Life Coolant” is a mixture of 55% coolant and 45% deionized water. (Minimum temperature: -44ºF [-42ºC])
For more details about engine coolant, contact your Toyota dealer.
If the coolant level drops within a short time of replenishing
Visually check the radiator, hoses, engine coolant reservoir caps, drain cock and water pump.
If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system.
WARNING
When the engine is hot
- Do not remove the engine coolant reservoir cap or the radiator cap.
- Do not touch the radiator or condenser as they may be hot and cause serious injuries, such as burns.
- The cooling system may be under pressure and may spray hot coolant if the cap is removed, causing serious injuries, such as burns.
NOTICE
- When adding coolant
Coolant is neither plain water nor straight antifreeze. The correct mixture of
water and antifreeze must be used to provide proper lubrication, corrosion protection and cooling. Be sure to read the antifreeze or coolant label. - If you spill coolant
Be sure to wash it off with water to prevent it from damaging parts or paint.